Cette page a été traduite avec Google Traduction

Bibliothèque de spécifications d'équipement

Informations de base sur le modèle

  • Fabricant:
    Vermeer
  • Modèle:
    D7x11A
  • Taille de plate-forme:
    0 - 10,000 lbs Pullback

Voir les fabricants Voir les modèles

Caractéristiques

Torque 1100ft-lbs 1489 Nm
Type Firestick I/II
Max Spindle Torque 1100ft-lbs 1489 Nm
Fluid Tank 55 gal 208 L
Length 144" 366 cm
Width 35.5" 90 cm
Max Pressure 500 psi 34 bar
Pump Pressure 500 psi
Drill Stem 6' 0''
Weight 23 lb (10 kg 23 lb (10 kg
Height 66" 188 cm
Min Bend Radius 95.5' 29.1 m
Pullback 7800 lbs 3538 kg
Ground Drive Speed 1 mph 1.6 km/hr
Max Carriage Speed 119 ft/min 3636 m/min
Fuel Tank Capacity 8 gal 30 L
Max Speed 3200 RPM 3200 RPM
Length 6' 1.8 m
Manufacturer's Gross HP Rating 37.5 HP 28 kw
Make and Model Kubota D-1505
Rod Carrying Capacity 198' 60.4 m
Pump Output 9 gpm
Engine Kubota
Pipe Diameter 1.66" standard 4.2 cm standard
Weight 4850 lbs 2200 kg
Thrust 7800 lbs 3538 kg
Hydraulic Tank Capacity 13 gal 49 L
Max Spindle Speed 120 RPM 120 RPM
Max Flow 9 GPM 34 LPM
Min Bore Diameter 2" 5 cm
Fuel Type Diesel
Entry Angle 32 degrees

Information additionnelle

-*2015 NOVEMBER*-

GENERAL DIMENSIONS AND WEIGHTS
Weight: 4850 lbs (2199.9 kg)

ENGINE
Make and Model: Kubota- V-1505-B
Fuel Type: Diesel
Gross Horsepower: 37.5 hp (28 kw)
Net Horsepower: 33.5 hp (25 kw)

OPERATIONAL
Pullback: 7800 lbs (3538 kg)
Maximum Carriage Speed at Maximum Engine RPM: 11 9 ft/min (36.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1100 ft-lb (1491.4 Nm)
Maximum Spindle Speed at Max Engine RPM: 120 rpm
Minimum Bore Diameter: 2" (5.1 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1 mph (1.6 km/h)
Drill Rack Angle: 32 deg

FLUID CAPACITIES
Fuel Tank: 8 gal (30.3 L)
Engine Crankcase with Filter: 6 qt (5.7 L)
Hydraulic Tank: 13.8 gal (52.2 L)

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 9 gpm (34.1 L/min)
Maximum Pressure: 500 psi (34.5 bar)

FEATURES
Breakout System: Hydraulic open-top
Stakedown System: Stationary; dual stakes

-*2004*-

DRILL UNIT
Length: 144" (366 cm) or 166" (422 cm) with water tank
Width: 35.5" - 49" (90 - 124 cm)
Height: 66" (188 cm)
Weight: 4850 lbs (2200 kg) with 198' (60 m) of drill stem
Open Top Vise: Yes
Transport Speed: 1 mph (1.6 kmh)
Stakedown System: Yes
Drilling Lights: Yes

OPERATIONAL
Max Spindle Torque: 1100 ft-lbs (1489 Nm)
Actual Pullback: 7800 lbs (3538 kg)
Actual Thrust: 7800 lbs (3538 kg)
Maximum Spindle Speed: 120 RPM
Electrical System: 12-volt

WATER SYSTEM
Maximum Flow: 9 gpm (34 Lpm)
Maximum Pressure: 500 psi (34 bar)
Onboard tank: 55 gal (208 L) (optional)

POWER SOURCE
Make and Model: Kubota- D-1505
Manufacturer's Gross HP Rating: 37.5 HP (28 kw)
Maximum Governed Speed: 3200 RPM

DRILL STEM
One-piece forged design: Yes
Length: 6' (1.8 m)
Pipe Diameter:
-1.66" (4.2 cm) standard
-1.32" (3.3 cm) optional
Minimum bend radius:
-95.5' (29.1 m) with 1.66" (4.2 cm) stem
-57.3' (17.5 m) with 1.32" (3.3 cm) stem
Weight:
-23 lbs (10 kg) 1.66" (4.2 cm) stem
-17 lbs (8 kg) 1.32" (3.3 cm)
Firestick stem capacity:
-198' (60.4 m) of 1.66" (4.2 cm) stem
-150' (45.7 m) of 1.32" (3.3 cm) stem

BORE
Maximum Bore Diameter: 2" (5 cm)

FLUID CAPACITIES
Hydraulic Reservoir: 13 gal (49 L)
Engine oil, including filter: 6 qt (6 L)
Fuel Tank: 8 gal (30 L)

FEATURES AND BENEFITS
Feature: Thrust Cylinder
Benefit: The thrust cylinder provides more efficient thrust and pull back power versus hydraulic powered motors and sprocket driven chains used for thrust.

Feature: Open Top Vise
Benefit: No wrenches are needed to couple and uncouple the drill stem. The open top vise is controlled/operated from the operator's station.

Feature: 55-Gallon On-Board Water Tank
Benefit: The on-board tank provides clean water supply for easy clean up and can also supply drilling fluid for smaller jobs.

Feature: FIRESTICK Drill Stem
Benefit: Available in two different drill stem options, Firestick Drill stem offers flexibility to match individual contractors' needs. They are constructed with a premium blend of alloy steel, provide excellent strength and flexibility, and have memory characteristics to better withstand bending and rotational torque forces encountered during the drilling process. Feature precision-machined threads that are designed specifically to help withstand the rigors of directional boring.

Feature: Dual Thrust/Rotation Controls
Benefit: The operator has complete and precise control over each function.

Voir les fabricants Voir les modèles

Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.

HDD Broker utilise des cookies et collecte des informations personnelles sur ses sites web.

Pour en savoir plus, consultez les règles de confidentialité et de cookie de HDD Broker. En cliquant sur "J'accepte", vous indiquez que vous avez réglé les paramètres de votre navigateur en fonction de vos préférences et que vous acceptez l'utilisation des cookies par HDD Broker.

x