Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    3610

View Manufacturers View Models

Specifications

Width 64 in
Height 86 in
Length 154 in

Additional Info

DIMENSIONS
Angle of approach: 20°
Overhang beyond tire: 3.5 in
Height: 86 in
Length - transport: 154 in
Wheelbase: 48 in
Width: 64 in
Tread: 46 in

GENERAL
Ditch Witch model 3610 tractor, 4-wheel drive, rigid frame,
ground drive through rubber tires, conventional two-wheel power steering,
centerline mechanical riding trencher.

OPERATION
Vehicle speeds @ 2500 rpm with 26 x 12.00-12 tires
Maximum transit forward
1st gear 2.3 mph
2nd gear 3.9 mph
3rd gear 7.3 mph
Maximum reverse 1.9 mph
Vehicle clearance circle (wall-to-wall) 27 ft
Operating weight (with shortest boom, 6 in wide
4-pitch chain, and 175 lb operator) 3940 lb

BACKFILL BLADE
Blade width: 64 in
Blade height: 13.9 in
Lift height above ground: 11.6 in
Blade drop below ground: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°

POWER TRAIN
Ground drive:
Transmission (mechanical) - 3 speeds forward, 1 reverse with gear drive to axles
Ground drive (hydraulic) - Hydraulic drive infinitely variable from zero
to maximum forward and reverse through gear reduction to axles
Clutch: Automotive spring-loaded foot-operated friction drive
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires
26 x 12.00-12 4-ply bar lug, 12 psi (83 kPa)
29 x 12.50-15 4 ply bar lug, 20 psi ( 138 kPa)
Trencher Drive
Transmission - 3 speeds, 1 reverse through shock absorbing clutch
belt drive to right angle drive to head shaft
Clutch - Automotive spring-loaded foot operated friction drive

POWER
Engine: Deutz F3L1011 - Diesel
Cooling medium: Air
Injection: Direct
Number of Cylinders: 3
Displacement: 125 cubic inches
Bore: 3.58 in
Stroke: 4.14 in
Engine manufacturer's gross horsepower rating: 43.5 hp
Max. governed speed as installed (no load): 2650 rpm
Flywheel power (full load): 35 hp

HYDRAULIC SYSTEM
Pump capacity: 9 gpm
Pump relief pressure: 2500 psi

FLUID CAPACITIES
Fuel tank: 13 gal
Engine lubrication oil: 6 qt
Transmission: 3.0 pt
Hydraulic reservoir: 7.7 gal
Hydraulic system: 9 gal

BATTERY
Group 26/26R/70, Res. Cap. 85 min SAE cold crank @ 0° F (-18°C), 700 amp

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x