Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT922
  • Rig Size:
    0 - 10,000 lbs Pullback

View Manufacturers View Models Back to Listing

Specifications

Joint Diameter 2" 51 mm
Manufacturer's Gross HP Rating 53.5 hp 37.3 kW
Max Pressure 750 psi 52 bar
Max Spindle Speed 186 RPM 186 RPM
Rated Engine RPM 2300 rpm 2300 rpm
Height 74" 1.88 m
Fuel Tank Capacity 19 gal 72 L
Weight 7100 lbs 3221 kg
Min Bore Diameter 3" 76 mm
Width 48" 1.22 m
Weight 29 lbs 13 kg
Max Flow 9 gpm 34 L/min
Entry Angle 10-14°
Length 72" 1.83 m
Length 146" 3.7 m
Fluid Tank 40 gal 151 L
Number of Cylinders 4
Thrust 9000 lbs 40 kN
Min Bend Radius 105' 32 m
Engine Cooling System Integrated Oil Integrated Oil
Make and Model Deutz F4L2011
Fuel Type Diesel
Max Spindle Torque 1100 ft-lbs 1491 Nm
Hydraulic Tank Capacity 18 gal 68 L
Pipe Diameter 1.58" 40 mm
Displacement 189 in3 3.1 L
Pullback 9000 lbs 40 kN

Additional Info

UPDATED JANUARY 2016

DIMENSIONS
Overall machine length: 146 in (3.7 m)
Overall machine width: 48 in (1.22 m)
Overall machine height: 74 in (1.88 m)
Operating weight (water tank full, 50 drill pipes): 7100 lb (3221 kg)
Entry angle: 10° to 14°
Angle of approach: 18°

POWER PIPE
Length of drill pipe, nominal: 72 in (1.83 m)
Diameter of drill pipe tool joint end: 2 in (51 mm)
Diameter of drill pipe: 1.58 in (40 mm)
Minimum bend radius: 105 ft (32 m)
Weight of drill pipe (lined): 29 lb (13 kg)

OPERATION
Maximum spindle speed: 186 rpm
Maximum spindle torque: 1100 ft/lb (1491 Nm)
Carriage thrust travel speed: 188 fpm (57 m/min)
Carriage pullback travel speed: 188 fpm (57 m/min)
Thrust force: 9000 lb (40 kN)
Pullback force: 9000 lb (40 kN)
Bore diameter: 3 in (76 mm)
Backream diameter: Soil dependent

POWER
Engine: Deutz F4L2011
Fuel: Diesel
Cooling medium: Integrated oil
Injection: Direct
Aspiration: Natural
Number of cylinders: 4
Displacement: 189 in3 (3.1 L)
Bore: 3.7 in (94 mm)
Stroke: 4.4 in (112 mm)
Manufacturer's gross power rating: 53.5 hp (37.3 kW)
Rated speed: 2300 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIa)

DRILLING FLUID SYSTEM (ONBOARD)
Drilling fluid pressure, max.*: 750 psi (52 bar)
Drilling fluid flow, max.*: 9 gpm (34 L/min)
Drilling fluid flow, max. (large pump)*: 13 gpm (49 L/min)
Fluid tank capacity: 40 gal (150 L)

FLUID CAPACITIES
Fuel tank: 19 gal (72 L)
Hydraulic reservoir: 18 gal (68 L)

BATTERY
SAE reserve capacity rating: 165 min
SAE cold crank rating @ 0° F (-18° C): 875 A

Specifications are general and subject to change without notice.

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x