Cette page a été traduite avec Google Traduction

Bibliothèque de spécifications d'équipement

Informations de base sur le modèle

  • Fabricant:
    Wirth
  • Modèle:
    Power Bore 112-15
  • Taille de plate-forme:
    100,001 - 200,000 lbs pullback

Voir les fabricants Voir les modèles

Caractéristiques

Pullback 112,000 Pounds
Weight 38,200 Pounds
Width 7.87 Feet
Engine 220 HP Caterpillar 3116 DITA Turbo Charged Diesel
Length 42 Feet
Height 9.84 Feet

Information additionnelle

Mounted:
Inter-Tractor Caterpillar Type 312 Excavator steel tracks.

Drill Rack Push Pull mechanism:
1 - 8 inch Hydraulic Cylinder

Rated Push:
40,000 pounds (56,000 Optional)

Frame:
Box Type w/ Teflon V Slides & Mud Gutter.

Entry Angle:
11 to 30+ degrees

Top Drive Rotary:
MS 50 Poclain 0 to 110 RPM @ 15,000 ft/lbs
(Optional) to 90 RPM @ 26,000ft/lb
Displacement 0 to 100gpm @ 0 to 6,000 psi.

Mud Swivel:
6,000 PSI Rated working pressure 10" OAL.1 .900 ID 2" NPT Hose connection

Wire Line Rotary Sub:
Installed with connection at Drillers Console

Drill Pipe:
Rig is equipped for upto 5" Flush Joint Drill Pipe
With API Modified Connections

Make/Break Unit:
Clincher 5 1/2" 30,000ft/lb MU 35,000ft/lb
Wrap Around Jaw assembly.

Carriage Travel:
18 foot stroke.

Carriage Speed:
98 feet per minute No load.
40 feet per minute full load.

Engine Instrumentation:
Standard gage panel. Oil Press, Water Temp, Engine RPM,
Hour Meter with Auto Shut Down.
Super Quite Muffler. Super Silence Package standard equipment.

Noise Emissions:
The equipment is fitted as standard with a Super
Quite Muffler with an engine silencing Package
Rated 72 dba at 4 feet

Hydraulic Pumps:
2 – Rexroth 100 G.P.M. piggy-backed.

Hydraulic Coolers:
Off Line 200 G.P.M. 140 deg. F.

Hydraulic Capacity:
200 gallon tank with filter only fill port.

Filter Capacity:
2 - 10 micron primary 2 quart each
2 - 20 micron secondary 2 quart each

Fuel Tank:
90 Gallon DOT approved

Safety Equipment:
Danger and warning signs posted where appropriate posted signing,
belt and moving machinery guards. Handrails & floor grating where applicable.

Operator Control:
Umbilical Stand with two 6 function Joy Sticks
Each joy stick controls:- Front M/B Jaw in/out
Rear M/B Jaw in/out - Jaw Rock CW/CC – MU/BO
-PUSH/PULL - Drill Rotate CW/CC - Drill Rotate Break

Control Features:
Feather control for thread free damage during
Make Up & Break Out operations
Umbilical design allows Drillers control to be
Placed either side of the rig.
Precise settings of all parameters Push/Pull
Rotate Torque & Make Up Torque.

Gage Panel:
WIRTH Control Panel with Analog Gage
Pull pounds/kilos - Push pounds/kilos
Drill Rotate ft/lb - Nwt/Mt - Rotary RPM
Make Up / Break Out ft/lb - Nwt/Mt

Pump Pressure Gage:
O to 3,000 PSI Type D fluid Filled
Mounted on rig mud line visible to driller

Voir les fabricants Voir les modèles

Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.

HDD Broker utilise des cookies et collecte des informations personnelles sur ses sites web.

Pour en savoir plus, consultez les règles de confidentialité et de cookie de HDD Broker. En cliquant sur "J'accepte", vous indiquez que vous avez réglé les paramètres de votre navigateur en fonction de vos préférences et que vous acceptez l'utilisation des cookies par HDD Broker.

x